Home  /  Resources  /  Printed Awning Care

Printed Awning Care: clean, store & re-skin.

// Care GuideCleaning · Storage · Re-SkinsFrom the DMP shop

A custom printed awning is the biggest sign your trailer carries, and it lives outdoors: sun, rain, track dust and a trip in and out of the trailer every weekend. The good news is that it doesn’t need much. Here’s the routine we recommend for a DMP printed cover, when a tear is a patch and when it’s a re-cover, and how to swap the graphics when your sponsors or your promotion change.

Why a printed awning is easy to live with

On a DMP awning the graphics are dye-sublimated into the fabric on our own large-format printers, not stuck on top as decals. That changes the care:

  • No decal edge. There’s nothing to peel, crack or curl, so you can roll and bag the cover without babying the art.
  • UV-resistant inks. Fade is minimal, so your logos still read at the last race of the season.
  • The art is the cover. When the look needs to change, you change the cover, not the frame.

Cleaning

Rinse off track grime (dust, dirt and rubber) so it doesn’t grind into the weave every time the cover is folded. A rinse after a dusty weekend does more than a hard scrub once a season. Let it dry before it goes back in the bag. If a spot won’t rinse out, call us before you try anything strong on printed fabric.

Packing & storage

  • Pack it dry when you can. If you have to stow it wet to beat the weather, air it out at home before it sits.
  • Use the bag. Every DMP awning ships with a fabric storage bag, and sidewall panels roll into the same bag, so nothing rides loose or gets left in the dirt.
  • Let rain run off. In use, set the awning with a slight pitch so water runs off instead of pooling. Standing water adds weight in one spot. Our wind & weather guide has the full routine.

Frame & hardware

The frame needs even less. Brackets and plates are clear-anodized billet and every mounting fastener is stainless, so nothing rusts or seizes after a wet weekend. If you ever swap a fastener, match it to what’s there.

Patch or re-cover?

A small, clean tear away from a seam can often be patched. Blown seams, faded or brittle fabric, or several tears usually mean it’s time for a new cover. Either way, send photos and we’ll tell you which it is. See repair & re-cover.

Seasonal & promotional graphics

Sponsors change and promotions end. Because the graphics live in the cover, a new look means a new printed cover or new panels, and the frame and hardware stay where they are.

  • Seasonal re-skins. We reprint the cover with your current sponsors and colors, and it zips onto the frame you already own.
  • Printed sidewalls, added later. In most cases walls can be added to a DMP awning you already have. They zip on or slide into keder track.
  • Any brand of fixed frame. We re-cover custom fixed-frame awnings we didn’t build, including units from shops that have closed.
  • Usually no frame to ship. Good photos and accurate measurements are enough for us to build a cover that fits.

One note: we don’t re-cover RV roll-up, retractable or spring-arm awnings. When you’re ready for a new look, start a free quote and our in-house design team will build or clean up the art before it prints.

FAQ

Printed awning questions.

How do I clean a printed trailer awning?+

Rinse off track grime, dust and dirt so it doesn’t grind into the weave, then let the cover dry before it goes in the bag. If a spot won’t rinse out, call us before you try anything strong on it.

Will the printed graphics fade or peel?+

The graphics are dye-sublimated into the fabric with UV-resistant inks, so there’s no decal edge to peel, crack or curl, and fade is minimal. Your logos still read at the last race of the season.

Can I change the graphics for a new season or promotion?+

Yes. A seasonal re-skin keeps your frame and hardware and replaces the cover with your current sponsors and colors, printed on the same in-house equipment. Printed sidewalls can be added later, too.

Can you re-skin an awning another shop built?+

Yes, if it’s a custom fixed-frame awning, including units from shops that have closed. Good photos and accurate measurements are usually enough. We don’t re-cover RV roll-up, retractable or spring-arm awnings.

Make your awning your biggest banner.

Tell us about your rig and your sponsors. We’ll print, sew and build it in Little Falls and ship it to your door.

Start Your Quote →